IPEX MHF2 Coaxial Cable Assembly

100% Compatible to Hirose U.FL LP-040

IPEX/IPX MHF2 cable assembly

IPEX MHF2 is the generation 2 of IPEX micro RF coaxial connector. It’s mating height (2.0mm) is lower than IPEX MHF (2.5mm). The frequency is up to 6GHz and can be used widely for application of GPS antenna, GSM antenna cable, WLAN adaptor cable. 

Key FeaturesIPEX MHF2 mated height 2.0mm

  1. SMT type coaxial receptacle and Mating plug cable connector
  2. Small form factor and low profile 2.0mm Max. Mating Height
  3. Applicable cable: 0.81mm or 1.13mm RF coaxial cable
  4. High productivity: Easy cable termination by “i-Fit” without soldering
  5. Application Technology: in fields of high speed transmission, high density, and ultra small size connector for Note Book PC, Smart Mobile Phone, GPS module, GSM module, WLAN 2.4GHz module, WLAN 5.8GHz module, Digital Appliance ...

Part Number


  • Frequency Range: DC up to 6 GHz
  • VSWR: 1.3 max. at 0.1~3GHz; 1.5 max. at 3~6GHz
  • Characteristic Impedance: 50 ohm
  • Temperature: -40℃ to +90℃
  • Rated Voltage: AC 60V
  • Contact Resistance of inner conductor: 1400 ohm/km MAX.(Ground)
  • Withstand Voltage: no breakdown at AC 1000V for 1 miniutes
  • Insulation Resistance: 1000M mega-ohm.km MIN.


  • Ground contact: Phosphor bronze with gold over nickel plating
  • Housing: LCP UL94V-0, Natural color
  • Center contact: Phosphor bronze with gold over nickel plating
I-PEX MHF2 SpecificationDownload I-PEX MHF4 Specification I-PEX MHF2 Plug DrawingDownload I-PEX MHF4 Plug Drawing I-PEX MHF2 Receptacle DrawingDownload I-PEX MHF4 Receptacle Drawing

IPEX/IPX MHFII RF coaxial connector is compatible to Hirose U.FL-LP(V)-040 series. Having same working performance, but IPEX/IPX has great advantage in cost and delivery.

You can get IPEX MHF2 20311-011R coaxial cable and IPEX MHF 20279-001E-01 connector in 7 days from Wellshow!